Access Ultra
An access reader with a built-in hub for complete, single-door entry control from one device.
Device €103.90 + installation on site €25.00
Included: the device, mounting, connection and commissioning to the usual extent. Travel costs are quoted to you in advance.
Every site is different. If yours needs more — new cable runs, wall openings, work at height or extra devices — you receive a binding quote before we start. Nothing is charged extra without your approval.
Access Ultra installation service
We install and configure the Access Ultra on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
An access reader with a built-in hub for complete, single-door entry control from one device.
Who it is for
- Features
- (1) Lock terminal (12V DC, 1A)(1) Exit request inputUnlock using an NFC card or UniFi Identity mobile appConnect and power using PoE+IP55-rated weather resistance (-30 to 40° C)
Technical specifications
- LEDs
- R/G/B/W <a href="" target="_blank" rel="noopener noreferrer">Learn More</a>
- Button
- (1) Factory reset
- Weight
- 140 g (4.9 oz)
- Speaker
- Yes
- Mounting
- Wall mount, gang box mount (Included), Junction box (Optional)
- Dimensions
- 126 x 45 x 37.45 mm (4.9 x 1.8 x 1.5")
- Connectivity
- BLE 4.2, Ethernet
- Power Method
- PoE+, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU
Show all 35 specificationsShow fewer
- UL 294 Level
- Destructive attack: Level I, Line security: Level I, Endurance: Level I, Standby power: Level I
- Mobile Unlock
- Yes
- NFC Frequency
- 13.56 Mhz
- Tamper Switch
- Yes
- Certifications
- CE, FCC, IC, Anatel: 06371-24-08356, SRRC, UL 294, CAN/ULC-60839-11-1
- Mount Material
- Stainless steel
- NDAA Compliant
- Yes
- NFC Read Range
- < 50 mm (1.95'')
- NFC Technology
- ISO 14443A, 14443B, 15693, NFC Tag 1,2,3,4,5, MIFARE Classic, MIFARE Plus, Mifare Ultralight, MIFARE DESFire
- Weatherproofing
- IP55
- UL 294 Statement
- Compliance with IEEE 802.3 specifications was not verified as part of UL 294., The equipment is intended to comply with the section of the National Electrical Code, ANSI/NFPA 70, Article 725.121, Power Sources for Class 2 and Class 3 Circuits.
- ESD/EMP Protection
- Air: ± 8kV, contact: ± 4kV
- Enclosure Material
- Polycarbonate, aluminum alloy
- Maximum User Count
- 3,000
- Networking Interface
- (1) 10/100 MbE RJ45 port
- Powered Output Relay
- Lock: 12V DC, 1A
- Software Information
- The software version can be checked at <a href="" target="_blank" rel="noopener noreferrer"></a>
- Indoor and Outdoor Use
- Yes
- Management Application
- Access
- Max. Power Consumption
- 18W
- Supported Voltage Range
- 44–57V DC
- CAN/ULC-60839-11-1 Grade
- Grade assignment: I
- NFC Card & Keyfob Access
- Yes
- PoE Cabling Requirements
- Cat 5e cabling is the minimum performance category recommended. The performance category utilized should match the transmission speed required at the installation site., The minimal conductor gauge permitted to connect between the PSE or power injector and the PD shall be 26 AWG (0.13 mm² ) for patch cords; 24 AWG (0.21 mm² ) for horizontal or riser cable.
- Ambient Operating Humidity
- 5 to 90% noncondensing
- Ambient Operating Temperature
- -30 to 40° C (-22 to 104° F)
- Document number, and issue date and/or revision level
- UA-Ultra, V01
Questions about the Access Ultra?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Access Ultra installation: installation and configuration
We install and configure the Access Ultra on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Documents
Frequently asked questions
How is the Access Ultra powered?
Over the network cable (Power over Ethernet): PoE+, UL 294 Power-limited Class 2 PSU, UL 60950-1/62368-1 LPS/PS2 PSU. No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the Access Ultra be installed outdoors or in unheated areas?
The manufacturer specifies protection Air: ± 8kV, contact: ± 4kV and an operating temperature of -30 to 40° C (-22 to 104° F). We plan the mounting point and cable entry to match.
What does installing the Access Ultra cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







