UUltraTechGermany

Physical security for businesses · across Germany

Access control for businesses

We plan and set up access control systems for businesses anywhere in Germany: readers at the doors, controllers on their own network segment, encrypted fobs or cards, and access rights by role and time. You receive documentation of doors, rights and log retention that you can hand to your works council and data protection officer.

An access control system replaces the bunch of keys – and creates a record every time a door opens: who, where, when. Many installations ignore that. A reader goes up, the logs grow without limit, and nobody has decided who may read them. Add fobs that can be copied in seconds and readers that send their data to the controller unencrypted. We build the system so that the technology matches the purpose you define: encrypted credentials, rights by role, retention periods set. We do not give the legal assessment – we provide the technical conditions and the documentation for it.

  • Reply the same working day
  • Written quote
  • Anywhere in Germany
  • Payment after handover

Key figures

Works-council co-determination on technical monitoring
§ 87 BetrVG
Purpose and storage limitation
Art. 5 GDPR
Escape routes stay openable
ASR A2.3
Standards and sources
Credentials
Fob or card, encrypted
Doors
Online (wired) and offline (cylinder)
Network
Controllers on their own VLAN
Logs
Retention period set
Documents
Door list, rights concept
Service area
Anywhere in Germany
Reply
The same working day
Payment
After handover

Use cases

What businesses use access control for

It usually starts with a lost key, or a room that should no longer be open to everyone:

Services

What we take on

  • Site survey: doors, entrances and areas, and which door needs which solution
  • Planning with you: areas, roles, time profiles – who may go where, and when
  • Mounting readers and, depending on the door, electronic cylinders or fittings
  • Controllers connected on their own VLAN, separate from the office network
  • Encrypted credentials (e.g. MIFARE DESFire) instead of copyable 125 kHz fobs
  • Encrypted link between reader and controller where the system supports it (OSDP Secure Channel)
  • Roles, time profiles and admin accounts with graded rights
  • Retention period for access logs, with automatic deletion
  • Handover documentation: doors, components, roles, rights, retention periods

What you get at handover

  • Door list with reader, controller and locking per door
  • Roles and rights concept with time profiles
  • Documentation of log retention and admin accounts
  • Briefing: issuing, blocking and changing credentials

Set-up

From credential to log

An access control system is a chain. If one link is weak, the best reader is no help:

  1. 1
    Identify

    Credential

    Fob or card with current encryption

  2. 2
    Read

    Reader

    At the door, encrypted to the controller where supported

  3. 3
    Decide

    Controller

    Decides on rights, on its own VLAN

  4. 4
    Open

    Lock

    Door strike, motor lock or cylinder; power from your electrician

  5. 5
    Manage

    Software

    Roles, time profiles, logs with retention

The most common weaknesses are copyable 125 kHz credentials and the unencrypted Wiegand line between reader and controller. We avoid both in new systems.

Comparison

Which credential?

The credential decides how easily access can be copied:

125 kHz fobEncryptionNoneAssessmentCopyable with simple devices; unsuitable for new systems
MIFARE Classic (13.56 MHz)EncryptionCrypto1, considered brokenAssessmentExisting systems only
MIFARE DESFire EV2 / EV3 (13.56 MHz)RecommendedEncryptionAESAssessmentState of the art for new systems
Smartphone (BLE / NFC)EncryptionDepends on the systemAssessmentPossible where supported; plan a fallback credential

Which credentials are possible depends on the system. For existing systems we check whether a change is possible without new readers.

Acceptance

What we deliver – and what you settle legally

The technology and the documents come from us. The legal assessment stays with you and your data protection officer:

Our documentation

  • Door list with components
  • Roles, time profiles and rights
  • Log retention period
  • Admin accounts

Your side

  • Define purpose and retention (Art. 5 GDPR)
  • Involve the works council if there is one (§ 87(1) no. 6 BetrVG)
  • Entry in the record of processing activities
  • Inform staff (Art. 13 GDPR)

If the system is also to record working time, that is a separate purpose with its own basis. We then keep access and time data apart from the set-up onwards.

Cost

What does access control cost?

You receive a quote after the site survey. It lists:

ItemHow it is charged
Planning, mounting, network, set-upIn the quote after the survey
Readers, controllers, cylinders, credentialsItemised
TravelStated in advance
Time-and-materials work, such as fault findingTime and materials, amount stated in the quote
BillingAt least 1 hour, then in full hours
PaymentAfter the work and handover: SEPA bank transfer, invoice or PayPal

What drives the price

  • Number of doors, online or offline
  • Number of users and credentials
  • Cable routes and existing network
  • Escape or fire doors
  • Taking over an existing system
  • Travel

Extra work that only shows up on site is agreed with you first – nothing is charged without your consent.

  • SEPATransfer
  • Invoice
  • PayPal

For your purchasing department

  • Quote

    In writing, up front: labour, material and travel are stated before any work starts.

  • Payment

    After the work and handover: SEPA bank transfer, invoice or PayPal. No prepayment.

  • Contact

    We reply the same working day, in English or German.

  • Supplier details

    UltraTech Germany · Leipziger Straße 40, 10117 Berlin, Germany · VAT ID DE463530263 · Legal notice

Quote

For an accurate quote

A floor plan with the doors to be secured helps most.

  • Which doors – ideally marked on a floor plan
  • Which of them are on escape routes or are fire doors
  • How many people get a credential
  • Roles and times you want (e.g. shifts, cleaning, suppliers)
  • Existing system: manufacturer, credentials, age
  • Whether there is a works council
  • Whether working time should be recorded too
  • Preferred date

Process

How a job runs

  1. 1

    Site survey

    We walk the doors: entrances, server room, storage, offices. For each door we check whether it is on an escape route, whether it is a fire door, and where power and network are available.

  2. 2

    Rights concept and quote

    Together you decide which roles exist and who may go where, and when. You receive the door list, the rights concept and a quote – the concept also serves as a basis for agreeing the system with the works council.

  3. 3

    Mounting and cabling

    Readers, controllers and locks are fitted and the data cables pulled. Fixed mains connections are made by your qualified electrician; we agree the interface beforehand.

  4. 4

    Set-up

    Controllers on their own VLAN, roles and time profiles created, credentials enrolled, log retention set, admin accounts with graded rights.

  5. 5

    Test, briefing and handover

    Every door is tested with authorised and blocked credentials. We show you how to issue and block credentials and hand over the documentation. You pay after the handover.

FAQ

Frequently asked questions

What does access control cost?

You receive a quote after the site survey. It depends on the number of doors, whether a door is wired (online) or fitted with a battery-powered cylinder (offline), the number of users and credentials, and the cable routes. Devices and materials are itemised.

Does the works council have to agree?

If your company has one: yes. An access control system stores who opened which door and when, which makes it a technical device suited to monitoring behaviour or performance under § 87(1) no. 6 of the German Works Constitution Act (BetrVG). Whether you intend to monitor anyone does not matter. Settle this before installation; our rights concept can serve as a basis for the works agreement.

How long may access logs be kept?

There is no fixed statutory period. The GDPR requires data to be kept only as long as its purpose needs (Art. 5(1)(e)). You set the purpose and the period, ideally with your data protection officer. We configure the period, and the system deletes automatically after it.

Can the access system also record working time?

Often technically yes, but it is a second purpose: access data serve security, time records serve working time. Under the GDPR principle of purpose limitation (Art. 5(1)(b)) each use needs its own basis, access rights and retention. If you want both, we set them up separately from the start.

Are old 125 kHz fobs still secure?

No. 125 kHz fobs send their ID without encryption and can be copied with cheap devices. MIFARE Classic encryption is also considered broken. For new systems we use credentials with current encryption, such as MIFARE DESFire EV2 or EV3.

What is the difference between online and offline doors?

Online doors are wired to the controller: rights and blocks apply at once and every opening is logged. Offline doors have battery-powered cylinders or fittings with no cable; rights are carried by the credential or a programming device. Offline is cheaper to retrofit, online reacts faster – most sites combine both: entrances and server room online, offices offline.

What about escape doors and fire doors?

Doors on escape routes must open in the direction of escape at all times (German workplace rule ASR A2.3) – access control must not prevent that. On fire and smoke doors only components permitted by the door’s approval may be used. We identify such doors during the survey and involve the manufacturer or the person responsible for fire safety before we quote.

Do you do the electrical installation?

No. We install readers, controllers and data cabling; fixed mains connections are made by your qualified electrician. We agree beforehand where each connection is needed.

Can you take over an existing system?

Often, yes. Typical tasks: replacing old 125 kHz credentials with encrypted ones, moving controllers onto their own network, blocking orphaned users and credentials, setting a retention period and documenting the system. Whether that works with the existing system is checked during the survey.

Sources

Standards and sources

Where a standard or a law gives a number, this page states it with its source. Where sources disagree, we give no number – your specification decides.

Show sources
  1. [1]§ 87(1) no. 6 German Works Constitution Act (BetrVG)
  2. [2]Art. 5 GDPR – principles of processing
  3. [3]ASR A2.3 – escape routes and emergency exits (German workplace rule)

Enquiry about Access control systems for businesses

  • Free initial consultation
  • Reply the same working day
  • Work by appointment
  • across Germany
Request a quote+49 30 50930365

For an accurate quote

  • Which doors – ideally marked on a floor plan
  • Which of them are on escape routes or are fire doors
  • How many people get a credential
  • Roles and times you want (e.g. shifts, cleaning, suppliers)
  • Existing system: manufacturer, credentials, age
  • Whether there is a works council
  • Whether working time should be recorded too
  • Preferred date
  • SEPATransfer
  • Invoice
  • PayPal