UUltraTechGermany

Business WiFi measured and planned · across Germany

WiFi site surveys for businesses

We measure your WLAN on site with mobile survey equipment, produce heatmaps per frequency band and deliver a plan with the number, position and channels of the access points. If you want, we then cable and mount the locations ourselves and measure the result for acceptance.

Poor business WiFi is usually answered with more access points – and often gets worse, because the devices interfere with each other on the same channel. So we first measure what actually arrives: signal levels, neighbouring networks, interference and behaviour under load. From that comes a plan for how many access points you really need and where they belong. We build networks, we are not just consultants: if you want, we pull the cables to the planned locations ourselves and test every link like any other data cabling. We work in English or German.

  • Reply the same working day
  • Written quote
  • Anywhere in Germany
  • Payment after handover

Key figures

6 GHz band, general authorisation (BNetzA)
5945–6425 MHz
Low Power Indoor, inside buildings only
200 mW
Very Low Power, also outdoors
25 mW
Standards and sources
Measurement
Passive and active, on site
Bands
2.4, 5 and 6 GHz
Result
Heatmaps, AP and channel plan
Optional
Cabling, mounting, acceptance
Price
Written quote in advance
Language
English or German
Service area
Anywhere in Germany
Reply
The same working day
Payment
After handover

Use cases

When businesses have their WiFi measured

Almost always because something doesn’t work – or before expensive hardware is bought:

Services

What we take on

  • Site walk and requirements: areas, use, device density and applications
  • Passive survey of the current state, including neighbouring networks and interference
  • Active measurement on the connected access point: throughput, latency and packet loss
  • Test set-up with an access point on a tripod before any cable is pulled
  • Heatmaps separately for 2.4 GHz, 5 GHz and – where useful – 6 GHz
  • Plan of access point locations with number, mounting point and orientation
  • Channel and transmit power plan, including DFS channels
  • Cat 6A cabling with PoE to the access point locations, test report per link
  • Configuration of SSIDs, a separate guest network and roaming between access points
  • Acceptance measurement after installation and handover documentation

What you get at handover

  • Heatmaps per frequency band
  • Plan with access point locations, channels and transmit power
  • After an installation: before-and-after measurement and documentation
  • Invoice only after handover

Comparison

2.4, 5 or 6 GHz?

Each band has its strength. Good business WiFi uses them side by side:

2.4 GHzStrengthsLongest range and best through walls; older and simple devicesKeep in mindOnly a few non-overlapping channels, many neighbouring networks and interference
5 GHzStrengthsMany more channels and throughput – the working band for officesKeep in mindSome channels require DFS: if the access point detects radar, it must change channel
6 GHzStrengths480 MHz of extra spectrum in Germany (5945–6425 MHz), many interference-free channelsKeep in mindShortest range; Wi-Fi 6E and Wi-Fi 7 devices only; up to 200 mW indoors, only 25 mW outdoors

Which bands you need where, the measurement shows. We set the channel plan for all bands together.

Acceptance

Good signal is not the same as a good connection

A heatmap alone only shows where signal arrives. Judging the WLAN takes two measurements:

Passive survey

  • Which signals arrive at each point
  • Neighbouring networks and interference
  • Channel use per band
  • Runs in the background, no disruption

Active survey

  • Connected to the access point
  • Throughput, latency and packet loss
  • Behaviour when moving between access points
  • Shows whether good signal also means good connections

After an installation we measure both again. You get the before-and-after state – proof of what the change achieved.

Cost

What does a WiFi site survey cost?

You get a written quote in advance. It lists:

ItemHow it is charged
Measurement, evaluation and planStated in the quote
Cabling and mountingOptional, in the same quote
Access points and materialsItemised
TravelStated in advance
Time-and-materials work, such as fault findingTime and materials, amount stated in the quote
BillingAt least 1 hour, then in full hours
PaymentAfter the work and handover: SEPA bank transfer, invoice or PayPal

What drives the price

  • Area and number of floors
  • Building: office, warehouse, hall, existing or new
  • Measurement and plan only – or cabling and mounting too
  • Number of access points
  • Travel

Extra work that only shows up on site is agreed with you first – nothing is charged without your consent.

  • SEPATransfer
  • Invoice
  • PayPal

For your purchasing department

  • Quote

    In writing, up front: labour, material and travel are stated before any work starts.

  • Payment

    After the work and handover: SEPA bank transfer, invoice or PayPal. No prepayment.

  • Contact

    We reply the same working day, in English or German.

  • Supplier details

    UltraTech Germany · Leipziger Straße 40, 10117 Berlin, Germany · VAT ID DE463530263 · Legal notice

Quote

For a quote that fits first time

With a floor plan and a few details about use we can estimate the effort.

  • Floor plan with areas and floors
  • What the WLAN must do: calls, video meetings, scanners, guests
  • Approximate number of devices at the same time
  • Existing access points and controller
  • Where the problems are today, and since when
  • Whether we may measure during operation
  • Measurement and plan only – or cabling and mounting too
  • Preferred date

Process

How a job runs

  1. 1

    Requirements

    We clarify what the WLAN must do: area, number of devices, applications such as calls or handheld scanners, and whether we may measure during operation.

  2. 2

    Measurement on site

    We walk the areas with mobile survey equipment and record the current state – including the neighbouring networks occupying your channels.

  3. 3

    Evaluation and planning

    You get heatmaps per band and a plan with access point locations, channels and transmit power. Critical locations we check first with an access point on a tripod.

  4. 4

    Cabling, mounting, configuration

    If you want, we pull the cables, mount the access points and set up SSIDs, guest network, channels and roaming to plan.

  5. 5

    Acceptance measurement

    After installation we measure again and hand over the before-and-after state with the documentation. Payment is due after handover.

FAQ

Frequently asked questions

How much does a WiFi site survey cost?

You get a written quote in advance. The effort depends on the area, the number of floors, the type of building and whether we only measure and plan or also cable and mount.

Do I need a survey, or would more access points do?

More access points only help if channels and transmit power fit. If two devices on the same channel are within range, they wait for each other and throughput drops – the extra device makes the network slower rather than faster. The measurement tells you whether you lack coverage or have a channel problem.

What is the difference between passive and active measurement?

In a passive survey we listen and record which signals and interference arrive at each point. In an active survey we actually connect to the access point and measure throughput, latency and packet loss. Only both together show whether good signal also means good connections.

Isn’t a simulation from the floor plan enough?

Planning on the floor plan is a good start, but it knows neither your neighbouring networks nor shelving, fire doors or machines. In existing buildings we therefore measure on site. In new builds, where there is nothing to measure yet, we plan on the drawings and measure after completion.

Is the 6 GHz band worth it yet?

The Bundesnetzagentur has opened 5945–6425 MHz for WLAN in Germany – 480 MHz of extra spectrum and many interference-free channels. The catch: higher frequencies pass walls less well, not every device supports the band, and outdoors only very low transmit power is allowed. It pays off mostly where many devices work in a small space. We tell you after the measurement whether it helps in your case.

Can you improve an existing WLAN without replacing everything?

Often yes. A clean channel and power plan, corrected mounting points and a separate guest network solve many problems without new hardware. If the devices are too old or locations are missing, we say so – and back it with the measurement.

Mesh or cabled access points?

In a business, cabled wherever possible. With mesh, the radio link between access points shares the air with the clients, which costs throughput. We use mesh where a cable is not feasible.

Can we work with you in English?

Yes. You can reach us and work with us in English or German.

How do we pay?

After the work and handover, by SEPA bank transfer, invoice or PayPal.

Sources

Standards and sources

Where a standard or a law gives a number, this page states it with its source. Where sources disagree, we give no number – your specification decides.

Show sources
  1. [1]Bundesnetzagentur: Wi-Fi in the 6 GHz band, press release of 14 July 2021 (German)
  2. [2]Bundesnetzagentur: general authorisation for WLAN in 5945–6425 MHz

Enquiry about WiFi site surveys and business WLAN

  • Free initial consultation
  • Reply the same working day
  • Work by appointment
  • across Germany
Request a quote+49 30 50930365

For a quote that fits first time

  • Floor plan with areas and floors
  • What the WLAN must do: calls, video meetings, scanners, guests
  • Approximate number of devices at the same time
  • Existing access points and controller
  • Where the problems are today, and since when
  • Whether we may measure during operation
  • Measurement and plan only – or cabling and mounting too
  • Preferred date
  • SEPATransfer
  • Invoice
  • PayPal