For electrical contractors, IT service providers and installers · across Germany
Subcontracting for network and fibre work
We work as a subcontractor for electrical contractors, IT service providers and network installers across Germany: fibre splicing, fibre and copper testing, patch panels, WiFi surveys and the IP side of camera systems. You remain your client’s contractor – we do not deal with the end client directly.
Splicing and test equipment only pays off when it is busy. Many electrical contractors and IT service providers therefore don’t keep it, yet need it a few times a year – or have the equipment but nobody free. That is what we are for. We take on the part that needs equipment and practice, work to your instructions and hand the reports to you, so you can pass them on to your client. We do not approach your client, and quotes and questions always go through you. We work in English or German.
- Reply the same working day
- Written quote
- Anywhere in Germany
- Payment after handover
Key figures
- No reverse charge
- § 13b
- Invoice without VAT
- 0 % VAT
- Splicer, OTDR, certifier
- Own equipment
- Services
- Splicing, testing, patch panels, WiFi
- Equipment
- Splicer, OTDR, certifier
- Reports
- To you, to pass on
- End client
- No direct contact
- Price
- Fixed per unit or day rate
- Language
- English or German
- Service area
- Anywhere in Germany
- Reply
- The same working day
- Payment
- After handover
Use cases
When businesses bring us in
Usually a project where one part needs equipment and practice that aren’t in-house right now:
Electrical contractor without splicing equipment
You lay the fibre cable, we splice and test – and you hand your client a complete report. More: Electrical contractor without splicing equipment
Acceptance testing for your project
Certification of the copper links or fibre testing against your client’s specification. More: Acceptance testing for your project
IT service provider with a network project
Terminate patch panels, sort the rack, test the links – while your team handles the active equipment and servers. More: IT service provider with a network project
WiFi survey before your installation
We measure and plan, you install. Heatmaps and plan go to you. More: WiFi survey before your installation
A fault during a project
A cable break or an unclear link, and your test equipment is elsewhere: we locate, repair and document. More: A fault during a project
Peaks in the order book
Enough orders, too few people: we take on a clearly defined part to your instructions.
Services
What we take on
- Fusion splicing of single-mode and multimode fibre, with a splice report
- Splicing crews for network operators and civil-works firms in FTTH roll-outs: splicing in closures, distribution points and buildings to your specification
- Fibre testing: loss measurement and OTDR, reports that hold up at your acceptance
- Certification of copper links against the required class
- Patch panels and splice boxes terminated, patched and labelled
- WiFi survey and acceptance measurement when you do the installation yourself
- The IP side of camera systems: network segment, recorder, configuration
- Troubleshooting and repair splices for faults during a project
- Reports and documentation in a form you can pass on to your client
What you get at handover
- Splice and test reports to pass on to your client
- Deviations from the plan, reported to you
- Invoice to you, without VAT
Set-up
Who talks to whom
Your client stays your client. This is the chain:
- 1Client
Your client
Commissions the work, accepts it, is invoiced by you
- 2Contractor
Your business
Contract, quote, instructions to us
- 3Subcontractor
Our job
Splice, test, terminate – to your instructions
- 4To you
Reports
Digitally to you, to pass on
- 5To you
Deviations
Reported to you, not to the end client
We keep a low profile with the end client, refer everything commercial to you and give them no quotes of our own.
Comparison
Do it yourself, rent equipment or subcontract?
Splicing and test equipment only pays off when it is busy. The three routes compared:
| Route | Fits when | Keep in mind |
|---|---|---|
| Own splicing and test equipment | Fits whenFibre work in-house all the time | Keep in mindPurchase, upkeep of the equipment and practice in the team |
| Renting equipment | Fits whenOccasional jobs, practised people of your own | Keep in mindWithout practice the report becomes contestable – exactly what counts at acceptance |
| SubcontractorWhat we offer | Fits whenA few times a year or at peaks | Keep in mindAgree the date and hand over clear instructions |
We are the third route: equipment, practice and reports come with us, and your client stays with you.
Acceptance
What you get – and what we need from you
A subcontract job runs well when the handovers are clear in both directions:
From us
- Splice and test reports to pass on
- The condition we find, even if it fails
- Deviations reported to you, not to the end client
- An invoice without VAT and without § 13b reverse charge
From you
- Specification or instructions: standard, limits, class
- Contact, access and time window on site
- How reports should be named and delivered
- How we should present ourselves to the end client
If you want a specific client-protection clause in the contract, we keep to it.
Cost
What does subcontracting cost?
We state the amount up front in the quote. The quote lists:
| Item | How it is charged |
|---|---|
| Splicing | By fibre type and fibre count, amount in the quote |
| Testing | Fixed price per tested link |
| Larger jobs | Day rate, where that makes more sense |
| Travel and expenses | In the quote up front, not on the invoice later |
| Troubleshooting and unclear existing installations | Time and materials, amount stated in the quote |
| Billing | At least 1 hour, then in full hours |
| Payment | After the work and handover: SEPA bank transfer, invoice or PayPal |
What drives the price
- Number of splices, links or ports
- Method and report format
- Duration and time window
- Whether you supply materials
- Travel
Extra work that only shows up on site is agreed with you first – nothing is charged without your consent.
- Transfer
- Invoice
For your purchasing department
Quote
In writing, up front: labour, material and travel are stated before any work starts.
Payment
After the work and handover: SEPA bank transfer, invoice or PayPal. No prepayment.
Contact
We reply the same working day, in English or German.
Supplier details
UltraTech Germany · Leipziger Straße 40, 10117 Berlin, Germany · VAT ID DE463530263 · Legal notice
Quote
For a quote that fits first time
With these details we can usually name the amount straight away.
- Scope: number of fibres, links or ports
- Fibre type or required class
- Standard and limits from the specification
- Period and construction schedule
- Location, access and contact on site
- Report format
- How we should present ourselves to the end client
- Whether you supply pigtails, cassettes or other materials
Process
How a job runs
- 1
Enquiry
Tell us the scope, fibre type or number of links and the planned period. A few details are usually enough for a firm quote.
- 2
Quote
You get a quote: for splicing by fibre type and fibre count, for testing per tested link, or a day rate – whichever suits the job better.
- 3
On site
We arrive at the agreed date, work to your instructions and report deviations to you, not to the end client.
- 4
Handover
You get the reports digitally, so you can add them to your acceptance documentation.
FAQ
Frequently asked questions
Do you splice as a subcontractor in FTTH roll-outs (NE3/NE4)?
Yes: we provide splicing crews for network operators and civil-works firms in FTTH roll-outs, plus fault location and repair splices. Blowing or pulling cable is not part of what we offer; we shape splice and test reports to your client’s specification, which you give us before the job.
Do you appear as your own company towards our client?
We keep a low profile with the end client and refer everything commercial to you. We do not solicit your clients and do not give them our own quotes. If you want a specific clause on this in the contract, we keep to it.
How quickly can you step in?
We reply to an enquiry the same working day and schedule the job by urgency; for a cable break or a fault during a project we try to respond sooner.
How do you charge: by time or by quote?
Splicing is priced by fibre type and fibre count, testing by the number of links; we state the amount in the quote. For troubleshooting and unclear existing installations we charge by time and estimate effort and travel in the quote first.
Does reverse charge (§ 13b UStG) apply to your invoices?
No. No VAT is charged on our services, and the tax liability does not shift to you under § 13b UStG. How you book it is for your tax adviser to confirm.
Do you bring your own test equipment?
Yes, we bring the splicer, OTDR and test equipment. That is usually exactly why we are called in.
Where do you work?
Anywhere in Germany. Travel and expenses are in the quote up front, not a surprise on the invoice.
Who is liable for the tested link?
We stand by our workmanship and our measurements. For existing links we did not install, we document the condition we find – even if it fails – so you have a solid basis towards your client.
How do we pay?
After the job and handover of the reports, by SEPA bank transfer, invoice or PayPal. We do not ask for payment in advance.
Sources
Standards and sources
Where a standard or a law gives a number, this page states it with its source. Where sources disagree, we give no number – your specification decides.
Show sources
Next
Related services
Fibre optics
Fibre splicing
Splice and terminate fibre on site
Fibre optics
Fibre testing (OTDR)
Measure and accept a link
Cabling & server room
Server rack & patch panel
Build or tidy up the server rack
Network & Wi-Fi
Wi-Fi site survey
Wi-Fi that reaches every corner
Fibre
All fibre services
Overview
All services
Enquiry about Subcontracting for electrical and IT businesses
- Free initial consultation
- Reply the same working day
- Work by appointment
- across Germany
For a quote that fits first time
- Scope: number of fibres, links or ports
- Fibre type or required class
- Standard and limits from the specification
- Period and construction schedule
- Location, access and contact on site
- Report format
- How we should present ourselves to the end client
- Whether you supply pigtails, cassettes or other materials
- Transfer
- Invoice