Building-to-Building Bridge XG
60 GHz wireless point-to-point bridge with a 10G SFP+ uplink for maximum performance and a 5 GHz backup radio.
Building-to-Building Bridge XG installation service
We install and configure the Building-to-Building Bridge XG on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
60 GHz wireless point-to-point bridge with a 10G SFP+ uplink for maximum performance and a 5 GHz backup radio.
Who it is for
- Features
- 500 m (1,640 ft) maximum range60 GHz & 5 GHz dual-radio redundancy(1) 10G SFP+ and (1) GbE PoE++ portPowered using PoE++Built-in LED alignment indicators
Technical specifications
- Button
- (1) Factory reset
- Weight
- Device: 1.7 kg (3.8 lb), With mount: 2.9 kg (6.3 lb)
- Dimensions
- ⌀191.8 x 59 mm (⌀7.6 x 2.3")
- Management
- Ethernet, Bluetooth
- Power Method
- PoE++, Passive PoE
- Wind Loading
- 56 N at 200 km/h (12.6 lbf at 125 mph)
- Coverage Area
- 500 m (1,640 ft)
- MIMO · 5 GHz
- 2 x 2 (DL MU-MIMO)
Show all 41 specificationsShow fewer
- WiFi Standard
- WiFi 5
- Certifications
- CE, FCC, IC, Terragraph
- LEDs · System
- R/G/B
- Mount Material
- Stainless steel
- NDAA Compliant
- Yes
- Bluetooth (MHz)
- Worldwide: 2400 - 2483.5 MHz
- Operating Modes
- PtP
- Spatial Streams
- 2
- Weatherproofing
- IPX6
- Channel Bandwidth
- Main radio (60 GHz): 2160/4320 MHz, Backup radio (5 GHz): VHT 20/40/80 MHz
- Wireless Security
- WPA2 AES
- Enclosure Material
- Aluminum alloy, UV-resistant polycarbonate
- Mounting Locations
- Wall, pole
- Operating Frequency
- Main radio (60 GHz): 57 - 66 GHz, Backup radio (5 GHz):, US/CA, U-NII-1: 5150 - 5250 MHz, U-NII-2A: 5250 - 5350 MHz, U-NII-2C: 5470 - 5725 MHz, U-NII-3: 5725 - 5850 MHz, Worldwide, 5150 - 5850 MHz
- Pole Mount Diameter
- 1–2.5" (25–63.5 mm)
- Includes PoE Adapter
- Yes
- Networking Interface
- (1) GbE RJ45 port (1) 1/10G SFP+ port
- Antenna Gain · 5 GHz
- 14 dBi
- Antenna Gain · 60 GHz
- 21 dBi
- Max. Power Consumption
- 29W
- Max. TX Power · 5 GHz
- 23 dBm
- Antenna Gain · 2.4 GHz
- 2 dBi (BLE)
- Max. Data Rate · 5 GHz
- 866.6 Mbps (BW80)
- Max. TX Power · 60 GHz
- 16 dBm
- Supported Voltage Range
- 48V DC ± 10%
- Max. Data Rate · 60 GHz
- 6 Gbps
- Ambient Operating Humidity
- 5 to 95% noncondensing
- Ambient Operating Temperature
- -40 to 55° C (-40 to 131° F)
- Supported Data Rates · 802.11a
- 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- Supported Data Rates · 802.11b
- 1, 2, 5.5, 11 Mbps
- Supported Data Rates · 802.11g
- 6, 9, 12, 18, 24, 36, 48, 54 Mbps
- Supported Data Rates · 802.11n
- 6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
- Supported Data Rates · 802.11ac (WiFi 5)
- 6.5 Mbps to 867 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)
Questions about the Building-to-Building Bridge XG?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Building-to-Building Bridge XG installation: installation and configuration
We install and configure the Building-to-Building Bridge XG on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Documents
Frequently asked questions
How is the Building-to-Building Bridge XG powered?
Over the network cable (Power over Ethernet): PoE++, Passive PoE. No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the Building-to-Building Bridge XG be installed outdoors or in unheated areas?
The manufacturer specifies an operating temperature of -40 to 55° C (-40 to 131° F). We plan the mounting point and cable entry to match.
What does installing the Building-to-Building Bridge XG cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







