Device Bridge Pro

1 / 8
Ubiquiti
Bridging
UDB-Pro-EU

5 GHz wireless bridge with PoE output that connects at 5+ km distances or seamlessly uplinks to UniFi WiFi.

205.90 EUR

Device Bridge Pro installation service

We install and configure the Device Bridge Pro on site and hand it over documented. Installation across Germany by quote — we reply the same working day.

  • VLANs for office, guests, phones and cameras
  • Clean patching with labelled ports
  • Firmware check and secured management access
  • Configuration backup and port documentation
  • Charged by time, minimum one hour; the amount, travel and material are in the quote.
Request installation

Payment

  • SEPATransfer
  • Invoice
  • PayPal
  • Pay after installation and handover
  • SSL-encrypted connection
  • Installed across Germany

    By appointment, on site

  • Reply the same working day

    Email, phone or WhatsApp

  • Installation by quote

    Written quote first

  • Documented handover

    Settings and cabling on paper

Product overview

5 GHz wireless bridge with PoE output that connects at 5+ km distances or seamlessly uplinks to UniFi WiFi.

Technical specifications

Button
(1) Factory reset
Weight
Device: 431 g (0.95 lb), With mount: 515 g (1.1 lb)
Antennas
Internal
Mounting
Pole (Included)
Dimensions
⌀189.5 x 64.3 mm (⌀7.4 x 2.5")
Management
(1) PoE in (PoE output not used) (1) Passive PoE output
Power Method
PoE, PoE+ (Required for PoE output)
Power Supply
48V, 0.32A PoE adapter (Included)
Show all 36 specifications
Wind Loading
69 N at 200 km/h (15.5 lbf at 125 mph)
Coverage Area
5 km (3.1 mi)
MIMO · 5 GHz
2 x 2
WiFi Standard
WiFi 5
Certifications
CE, FCC, IC
LEDs · System
Power, (2) Ethernet status - main port/PoE out port, (4) signal strength
Mount Material
UV-stabilized polycarbonate, stainless steel
NDAA Compliant
Yes
Spatial Streams
2
Weatherproofing
IPX6
Channel Bandwidth
20/40/80 (MHz)
Wireless Security
WPA2 AES
Enclosure Material
UV-resistant polycarbonate
Mounting Locations
Wall, pole
Operating Frequency
US/CA:, U-NII-1 5150 - 5250 MHz, U-NII-2A 5250 - 5350 MHz, U-NII-2C 5470 - 5725 MHz, U-NII-3 5725 - 5850 MHz, Worldwide:, 5150 - 5875 MHz
Pole Mount Diameter
0.8–2.1" (20–53.1 mm)
Networking Interface
(2) GbE RJ45 ports
Antenna Gain · 5 GHz
19 dBi
Max. Power Consumption
9W
Max. TX Power · 5 GHz
25 dBm
Max. Conducted TX Power
25 dBm (Combined)
Max. Data Rate · 5 GHz
867 Mbps (BW80)
Supported Voltage Range
42.5–57V DC
Ambient Operating Humidity
5 to 95% noncondensing
Ambient Operating Temperature
-40 to 60° C (-40 to 140° F)
Supported Data Rates · 802.11a
6, 9, 12, 18, 24, 36, 48, 54 Mbps
Supported Data Rates · 802.11n
6.5 Mbps to 300 Mbps (MCS0 - MCS15, HT 20/40)
Supported Data Rates · 802.11ac (WiFi 5)
6.5 Mbps to 866.7 Mbps (MCS0 - MCS9 NSS1/2, VHT 20/40/80)

Questions about the Device Bridge Pro?

Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.

Installation & service

Device Bridge Pro installation: installation and configuration

We install and configure the Device Bridge Pro on site and hand it over documented.

1

Rack installation

Mounted, earthed and powered, with cable management so the rack stays serviceable.

2

VLAN configuration

Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.

3

Replacing an old switch

Old configuration read out and carried over, changeover planned to keep downtime short.

4

Documentation

Port plan, VLAN list and configuration backup handed over.

What is included for this product

  • VLANs for office, guests, phones and cameras
  • Clean patching with labelled ports
  • Firmware check and secured management access
  • Configuration backup and port documentation

Price and process

Charged by time, minimum one hour; the amount, travel and material are in the quote.

Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.

Frequently asked questions

How is the Device Bridge Pro powered?

Over the network cable (Power over Ethernet): PoE, PoE+ (Required for PoE output). No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.

Can the Device Bridge Pro be installed outdoors or in unheated areas?

The manufacturer specifies an operating temperature of -40 to 60° C (-40 to 140° F). We plan the mounting point and cable entry to match.

What does installing the Device Bridge Pro cost?

Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.

Do you install outside Berlin?

Yes — installation across Germany, by appointment.

How quickly will I hear back?

The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.

Related products

More products we supply and install

Device Bridge Pro Sector
Ubiquiti
Bridging
Device Bridge Pro Sector
5 GHz point-to-multipoint access point that wirelessly bridges 50+ Device Bridge Pro clients at 5+ km distances.
SKU:UDB-Pro-Sector
205.90 EUR
Installation Available
UniFi Device Bridge
Ubiquiti
Bridging
UniFi Device Bridge
Plug-and-play, wireless bridging PoE adapter with integrated UniFi WiFi Auto-Link.
SKU:UDB-EU
103.90 EUR
Installation Available
Device Bridge IoT
Ubiquiti
Bridging
Device Bridge IoT
Ultra-compact wireless bridge for IoT devices with integrated UniFi WiFi Auto-Link, versatile mounting options, and powered by USB Type-C or 4-pin DC socket.
SKU:UDB-IoT
50.90 EUR
Installation Available
Device Bridge Switch
Ubiquiti
Bridging
Device Bridge Switch
Compact PoE+ switch* with (1) 10 GbE port, (7) 2.5 GbE ports, and 6 GHz-ready WiFi 7 bridging integration for seamless, high-capacity wireless uplink to UniFi WiFi.
SKU:UDB-Switch-EU
309.90 EUR
Installation Available
Building-to-Building Bridge
Ubiquiti
Bridging
Building-to-Building Bridge
60 GHz wireless point-to-point bridge with a 5 GHz backup radio.
SKU:UBB-EU
516.90 EUR
Installation Available
Access Point In-Wall HD Cover
Ubiquiti
Access Point Accessories
Access Point In-Wall HD Cover
Customized encasing for In-Wall HD.
SKU:IW-HD-BK-3
40.90 EUR
Installation Available
WiFiMan Wizard
Ubiquiti
Access Point Accessories
WiFiMan Wizard
A portable spectrum analyzer designed for the WiFiMan iOS and Android mobile app.
SKU:WM-W
102.90 EUR
Installation Available
Swiss Army Knife Omni Antenna
Ubiquiti
Access Point Accessories
Swiss Army Knife Omni Antenna
Antenna accessory that provides omnidirectional, extended range coverage for Swiss Army Knife Ultra.
SKU:UACC-UK-Ultra-Omni-Antenna-AO
15.90 EUR
Installation Available

Have the Device Bridge Pro installed?

We supply, mount and commission it. Ask for a no-obligation quote — we usually reply the same working day.