HPE Aruba AP-515 Wi-Fi 6 Access Point (RW)
Dual-radio Wi-Fi 6 access point with 4x4 MIMO on 5 GHz, up to 4.8 Gbps, SmartRate port and 160 MHz channels.
HPE Aruba AP-515 Wi-Fi 6 access point: 4x4 on 5 GHz, up to 4.8 Gbps, SmartRate uplink, PoE. WLAN survey, supply and installation in Berlin.
HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) installation service
Have the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) installed where it actually covers: we place it from a measured WLAN survey, mount it on the ceiling (up to 50 % more range than wall mounting), and configure SSIDs, VLANs and WPA3. 802.11ax (Wi-Fi 6) — powered over PoE (PoE 802.3af/at/bt; max 20.8 W (802.3at/bt), 16.0 W DC), so the switch budget is checked first. Installation across Germany by quote — we reply the same working day.
- Survey with heatmap before and after installation
- Ceiling mounting with one Cat 6A line per access point
- Separate networks for staff, guests and IoT (VLANs)
- Roaming and channel plan so devices move between APs cleanly
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
The HPE Aruba AP-515 is an indoor dual-radio Wi-Fi 6 access point with 4x4 MIMO on 5 GHz and 2x2 on 2.4 GHz: up to 4.8 Gbps to a 4SS HE160 client and up to 574 Mbps on 2.4 GHz, for a maximum real-world aggregate of 2.69 Gbps. The uplink is an HPE SmartRate port, so a 2.5 Gbps switch port is not wasted, and a second gigabit port is available. With 160 MHz channel width and four spatial streams it is the model for dense areas — open-plan floors, lecture rooms, event spaces. Powered over 802.3at or 802.3bt; on 802.3af it starts with power management restrictions.
Who it is for
- Features
- 4x4 MIMO on 5 GHz with 160 MHz channelsOFDMA with up to 16 resource units and MU-MIMOHPE SmartRate multi-gigabit uplinkWPA3 and Enhanced Open securityBuilt-in Bluetooth 5 and Zigbee for IoTAdvanced Cellular Coexistence (ACC)Plenum rated for air-handling spaces
Technical specifications
- MTBF
- 560,000 hours at +25 °C
- Power
- PoE 802.3af/at/bt; max 20.8 W (802.3at/bt), 16.0 W DC
- Radios
- Dual radio, 5 GHz 4x4 MIMO and 2.4 GHz 2x2 MIMO
- Antennas
- Four integrated dual-band downtilt omni-directional, peak gain 4.2 dBi (2.4 GHz) / 7.5 dBi (5 GHz)
- Ethernet
- E0: HPE SmartRate (RJ-45, up to 5 Gbps); E1: 10/100/1000BASE-T
- IoT radio
- Bluetooth 5 and Zigbee (802.15.4)
- Part number
- Q9H62A (RW)
- Channel width
- Up to 160 MHz (5 GHz), 40 MHz (2.4 GHz)
Show all 14 specificationsShow fewer
- Wi-Fi standard
- 802.11ax (Wi-Fi 6)
- 5 GHz data rate
- Up to 4.8 Gbps (4SS HE160)
- 2.4 GHz data rate
- Up to 574 Mbps (2SS HE40)
- Aggregate data rate
- 2.69 Gbps maximum real-world (HE80/HE20)
- Dimensions / weight
- 200 x 200 x 46 mm / 810 g
- Operating temperature
- 0 to +50 °C
Questions about the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW)?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) installation: placement, mounting and configuration
Have the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) installed where it actually covers: we place it from a measured WLAN survey, mount it on the ceiling (up to 50 % more range than wall mounting), and configure SSIDs, VLANs and WPA3. 802.11ax (Wi-Fi 6) — powered over PoE (PoE 802.3af/at/bt; max 20.8 W (802.3at/bt), 16.0 W DC), so the switch budget is checked first.
1WLAN survey
Measured on site, not guessed from a floor plan: walls, glass and interference change everything.
2Ceiling mounting
Mounted where the survey says, with a dedicated network line and PoE from the switch.
3Networks and security
Staff, guest and IoT networks separated; WPA3 where the clients support it.
4Acceptance measurement
A second measurement after installation shows the coverage you actually got.
What is included for this product
- Survey with heatmap before and after installation
- Ceiling mounting with one Cat 6A line per access point
- Separate networks for staff, guests and IoT (VLANs)
- Roaming and channel plan so devices move between APs cleanly
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Frequently asked questions
How is the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) powered?
Over the network cable (Power over Ethernet): PoE 802.3af/at/bt; max 20.8 W (802.3at/bt), 16.0 W DC. No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) be installed outdoors or in unheated areas?
The manufacturer specifies an operating temperature of 0 to +50 °C. We plan the mounting point and cable entry to match.
Do I need a WLAN survey first?
For more than one access point, yes. Walls, glass and neighbouring networks decide where the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) belongs; a measurement on site avoids dead spots and overlapping channels.
What does installing the HPE Aruba AP-515 Wi-Fi 6 Access Point (RW) cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







