HPE Aruba AP-505 Wi-Fi 6 Access Point (RW)
Dual-radio Wi-Fi 6 access point, 2x2 on both bands, 1.49 Gbps aggregate — for offices and low to medium density areas.
HPE Aruba AP-505 Wi-Fi 6 access point: 2x2 dual radio, 1.49 Gbps, PoE 802.3af/at, Bluetooth and Zigbee. WLAN survey, supply and installation in Berlin.
HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) installation service
Have the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) installed where it actually covers: we place it from a measured WLAN survey, mount it on the ceiling (up to 50 % more range than wall mounting), and configure SSIDs, VLANs and WPA3. 802.11ax (Wi-Fi 6) — powered over PoE (PoE 802.3af/at (class 3 or 4); max 11.0 W (802.3at)), so the switch budget is checked first. Installation across Germany by quote — we reply the same working day.
- Survey with heatmap before and after installation
- Ceiling mounting with one Cat 6A line per access point
- Separate networks for staff, guests and IoT (VLANs)
- Roaming and channel plan so devices move between APs cleanly
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
The HPE Aruba AP-505 is an indoor dual-radio Wi-Fi 6 access point with 2x2 MIMO on both bands: two spatial streams for up to 1.2 Gbps on 5 GHz and up to 574 Mbps on 2.4 GHz, for a maximum real-world aggregate of 1.49 Gbps. It is the sensible choice where the AP-515 would be over-specified — offices, practices and meeting rooms rather than lecture halls. Powered over 802.3af or 802.3at, so it runs from an existing PoE switch, and the integrated Bluetooth 5 and Zigbee radio is there if the building later adds sensors. We plan the placement from a WLAN survey with heatmaps before quoting.
Who it is for
- Features
- Wi-Fi 6 (802.11ax) with OFDMA and MU-MIMOTarget Wake Time (TWT) for battery-powered clientsWPA3 and Enhanced Open securityBuilt-in Bluetooth 5 and Zigbee for IoTRuns from an existing 802.3af or 802.3at PoE switchManaged by Aruba Central or a controllerAruba Air Slice traffic prioritisation
Technical specifications
- Power
- PoE 802.3af/at (class 3 or 4); max 11.0 W (802.3at)
- Radios
- Dual radio, 5 GHz and 2.4 GHz, 2x2 MIMO
- Antennas
- Two integrated dual-band downtilt omni-directional
- Ethernet
- E0: 10/100/1000BASE-T (RJ-45)
- IoT radio
- Bluetooth 5 and Zigbee (802.15.4)
- Part number
- R2H28A (RW)
- Wi-Fi standard
- 802.11ax (Wi-Fi 6)
- 5 GHz data rate
- Up to 1.2 Gbps (2SS HE80)
Show all 12 specificationsShow fewer
- 2.4 GHz data rate
- Up to 574 Mbps (2SS HE40)
- Associated clients
- Up to 256 per radio
- Aggregate data rate
- 1.49 Gbps maximum real-world (HE80/HE20)
- Operating temperature
- 0 to +50 °C
Questions about the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW)?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) installation: placement, mounting and configuration
Have the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) installed where it actually covers: we place it from a measured WLAN survey, mount it on the ceiling (up to 50 % more range than wall mounting), and configure SSIDs, VLANs and WPA3. 802.11ax (Wi-Fi 6) — powered over PoE (PoE 802.3af/at (class 3 or 4); max 11.0 W (802.3at)), so the switch budget is checked first.
1WLAN survey
Measured on site, not guessed from a floor plan: walls, glass and interference change everything.
2Ceiling mounting
Mounted where the survey says, with a dedicated network line and PoE from the switch.
3Networks and security
Staff, guest and IoT networks separated; WPA3 where the clients support it.
4Acceptance measurement
A second measurement after installation shows the coverage you actually got.
What is included for this product
- Survey with heatmap before and after installation
- Ceiling mounting with one Cat 6A line per access point
- Separate networks for staff, guests and IoT (VLANs)
- Roaming and channel plan so devices move between APs cleanly
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Frequently asked questions
How is the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) powered?
Over the network cable (Power over Ethernet): PoE 802.3af/at (class 3 or 4); max 11.0 W (802.3at). No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) be installed outdoors or in unheated areas?
The manufacturer specifies an operating temperature of 0 to +50 °C. We plan the mounting point and cable entry to match.
Do I need a WLAN survey first?
For more than one access point, yes. Walls, glass and neighbouring networks decide where the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) belongs; a measurement on site avoids dead spots and overlapping channels.
What does installing the HPE Aruba AP-505 Wi-Fi 6 Access Point (RW) cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







