Switch Hi-Capacity Aggregation
A 32-port, Layer 3 switch made for high-capacity 10G SFP+ and 25G SFP28 connections.
Switch Hi-Capacity Aggregation installation service
We install and configure the Switch Hi-Capacity Aggregation on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
A 32-port, Layer 3 switch made for high-capacity 10G SFP+ and 25G SFP28 connections.
Who it is for
- Features
- (28) 10G SFP+ ports(4) 25G SFP28 portsDC power backup-readyLayer 3 switching
Technical specifications
- Weight
- Without mounting brackets: 4.6 kg (10.1 lb), With mounting brackets: 4.7 kg (10.4 lb)
- Layer 3
- Yes
- LLDP-MED
- Yes
- DHCP Relay
- Yes
- Dimensions
- 442 x 325 x 44 mm (17.4 x 12.8 x 1.7")
- Management
- Ethernet, AR
- QoS (DSCP)
- Yes
- Redundancy
- DC Power Backup
Show all 60 specificationsShow fewer
- STP & RSTP
- Yes
- Voice VLAN
- Yes
- Form Factor
- Rack mount (1U)
- LCM Display
- 1.3" touchscreen
- Flow Control
- Yes
- Jumbo Frames
- Yes
- Power Method
- (1) Universal input, 100–240V AC, 50/60 Hz (1) USP RPS DC input
- Power Supply
- AC/DC, internal, 100W
- IGMP Snooping
- Yes
- Storm Control
- Yes
- 802.1X Control
- Yes
- Certifications
- CE, FCC, IC, Anatel: 20756-22-08356
- ESD Protection
- Air: ± 16kV, contact: ± 12kV
- Mount Material
- SGCC steel
- NDAA Compliant
- Yes
- Port Isolation
- Yes
- Port Mirroring
- Yes
- Forwarding Rate
- 565 Mpps
- Loop Protection
- Yes
- Supported VLANs
- 1,000
- Heat Dissipation
- 341 BTU/hr
- Egress Rate Limit
- Yes
- Enclosure Material
- SGCC steel
- IPv4 Static Routes
- 256
- Packet Buffer Size
- 4 MB
- Power Input Method
- AC input
- Switching Capacity
- 760 Gbps
- Access Lists · MAC
- 128
- Access Lists · IPv4
- 128
- MAC Address Blocking
- Yes
- Supported Rack Depth
- 400~1200 mm (15.7-47.2")
- LACP Port Aggregation
- Yes
- MAC Address Table Size
- 32,000
- Max. Power Consumption
- 100W
- Port Layout · 10G SFP+
- 28 (10G/1G)
- Supported Voltage Range
- 100–240V AC
- DHCP Snooping & Guarding
- Yes
- Port Layout · 25G SFP28
- 4 (25G/10G/1G)
- Virtual Network Override
- Yes
- Ambient Operating Humidity
- 10 to 90% noncondensing
- MAC-Based Port Restriction
- Yes
- DHCP Server (Local Networks)
- Yes
- Ambient Operating Temperature
- -5 to 40° C (23 to 104° F)
- Total Non-Blocking Throughput
- 380 Gbps
- Static Routing (Local Networks)
- Yes
- IP-Based ACLs & Network Isolation
- Yes
- MAC-Based ACLs & Device Isolation
- Yes
- Inter-VLAN Routing (Local Networks)
- Yes
- Multicast & Broadcast Rate Limiting
- Yes
- Application Requirements · UniFi Network
- Version 6.1.25 and later
- Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
- Yes
- Pro AV Profiles (Play, Dante, Q-SYS, NDI, SDVoE, Shure, AES67, Crestron)
- Yes
Questions about the Switch Hi-Capacity Aggregation?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Switch Hi-Capacity Aggregation installation: installation and configuration
We install and configure the Switch Hi-Capacity Aggregation on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Frequently asked questions
Can the Switch Hi-Capacity Aggregation be installed outdoors or in unheated areas?
The manufacturer specifies protection Air: ± 16kV, contact: ± 12kV and an operating temperature of -5 to 40° C (23 to 104° F). We plan the mounting point and cable entry to match.
What does installing the Switch Hi-Capacity Aggregation cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







