Switch Flex XG
A compact, 5-port, Layer 2 switch that supports 10 GbE speeds and can be powered with PoE or a 5V USB-C adapter.
Switch Flex XG installation service
We install and configure the Switch Flex XG on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
A compact, 5-port, Layer 2 switch that supports 10 GbE speeds and can be powered with PoE or a 5V USB-C adapter.
Who it is for
- Features
- (4) 10 GbE ports(1) GbE PoE+ input port for power
Technical specifications
- Weight
- 1.2 kg (2.7 lb)
- LLDP-MED
- Yes
- Dimensions
- 135 x 185 x 32 mm (5.3 x 7.3 x 1.3")
- Management
- Ethernet
- STP & RSTP
- Yes
- Voice VLAN
- Yes
- Form Factor
- Compact desktop, wall
- Flow Control
- Yes
Show all 48 specificationsShow fewer
- Jumbo Frames
- Yes
- Power Method
- (1) PoE+ (1) USB Type-C, 5V DC, 5A
- Power Supply
- AC/DC, external, 25W
- IGMP Snooping
- Yes
- Storm Control
- Yes
- 802.1X Control
- Yes
- Certifications
- CE, FCC, IC, Anatel: 06606-25-08356
- ESD Protection
- Air: ± 16kV, contact: ± 12kV
- NDAA Compliant
- Yes
- Port Isolation
- Yes
- Port Mirroring
- Yes
- Forwarding Rate
- 61 Mpps
- Loop Protection
- Yes
- Supported VLANs
- 1,000
- Heat Dissipation
- 85.3 BTU/hr
- Egress Rate Limit
- Yes
- Enclosure Material
- Polycarbonate
- Packet Buffer Size
- 1.5 MB
- Power Input Method
- USB Input, PoE
- Switching Capacity
- 82 Gbps
- Access Lists · MAC
- 10
- Access Lists · IPv4
- 12
- MAC Address Blocking
- Yes
- LACP Port Aggregation
- Yes
- MAC Address Table Size
- 16,000
- Max. Power Consumption
- 25W
- Supported Voltage Range
- 4.8—5.2V DC/USB, 44V—57V PoE
- DHCP Snooping & Guarding
- Yes
- Virtual Network Override
- Yes
- Port Layout · 1 GbE RJ45
- 1 (1G/100M/10M)
- Ambient Operating Humidity
- 10 to 90% noncondensing
- MAC-Based Port Restriction
- Yes
- Port Layout · 10 GbE RJ45
- 4
- Ambient Operating Temperature
- -5 to 45° C (23 to 113° F)
- Total Non-Blocking Throughput
- 41 Gbps
- IP-Based ACLs & Network Isolation
- Yes
- MAC-Based ACLs & Device Isolation
- Yes
- Multicast & Broadcast Rate Limiting
- Yes
- Application Requirements · UniFi Network
- Version 6.1.67 and later
- Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
- Yes
Questions about the Switch Flex XG?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Switch Flex XG installation: installation and configuration
We install and configure the Switch Flex XG on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Frequently asked questions
How is the Switch Flex XG powered?
Over the network cable (Power over Ethernet): (1) PoE+ (1) USB Type-C, 5V DC, 5A. No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the Switch Flex XG be installed outdoors or in unheated areas?
The manufacturer specifies protection Air: ± 16kV, contact: ± 12kV and an operating temperature of -5 to 45° C (23 to 113° F). We plan the mounting point and cable entry to match.
What does installing the Switch Flex XG cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







