Switch Flex
Flexible 5-port, Layer 2 PoE switch for indoor and outdoor use, that can be powered with PoE++.
Switch Flex installation service
We install and configure the Switch Flex on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
Flexible 5-port, Layer 2 PoE switch for indoor and outdoor use, that can be powered with PoE++.
Who it is for
- Features
- (4) GbE PoE+ ports(1) GbE PoE++ input port for power— 46W PoE availability* PoE++ input— 20W PoE availability PoE+ input— 8W PoE availability PoE inputIndoor/Outdoor
Technical specifications
- Weight
- 230 g (8.1 oz)
- Dimensions
- 122.5 x 107.1 x 28 mm (4.8 x 4.2 x 1.1")
- Management
- Ethernet
- Form Factor
- Compact desktop, wall, pole
- Flow Control
- Yes
- Jumbo Frames
- Yes
- Power Method
- PoE++
- Outdoor Ready
- Yes
Show all 32 specificationsShow fewer
- Certifications
- CE, FCC, IC, Anatel: 14502-20-08356
- ESD Protection
- Air/contact: ± 16kV
- NDAA Compliant
- Yes
- Port Isolation
- Yes
- Port Mirroring
- Yes
- Forwarding Rate
- 7 Mpps
- Max. PoE Output
- Up to PoE+
- Supported VLANs
- 1,000
- Heat Dissipation
- 17.1 BTU/hr (Excluding PoE Output)
- Egress Rate Limit
- Yes
- PoE Ports · PoE+
- 4
- PoE Ports · PoE++
- 1
- Power Input Method
- PoE
- Switching Capacity
- 10 Gbps
- MAC Address Table Size
- 2,000
- Max. Power Consumption
- 5W (Excluding PoE Output), 51W (Including PoE Output)
- Total PoE Availability
- PoE++/60W PoE adapter input: 46W, PoE+ input: 20W, PoE input: 8W
- Supported Voltage Range
- 50–57V PoE
- Port Layout · 1 GbE RJ45
- 5 (4 PoE+; 1 PoE++) (1G/100M/10M)
- Ambient Operating Humidity
- 5 to 95% noncondensing
- Ambient Operating Temperature
- 46W PoE output: -40 to 55° C (-40 to 131° F), 25W PoE output: -40 to 65° C (-40 to 149° F)
- Total Non-Blocking Throughput
- 5 Gbps
- Max. PoE Wattage per Port by PSE · PoE+
- 25W
- Application Requirements · UniFi Network
- Version 5.10.3 and later
Questions about the Switch Flex?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Switch Flex installation: installation and configuration
We install and configure the Switch Flex on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Frequently asked questions
How is the Switch Flex powered?
Over the network cable (Power over Ethernet): PoE++. No socket is needed at the mounting point, but the switch must supply enough PoE budget — we check that before installation.
Can the Switch Flex be installed outdoors or in unheated areas?
The manufacturer specifies protection Air/contact: ± 16kV and an operating temperature of 46W PoE output: -40 to 55° C (-40 to 131° F), 25W PoE output: -40 to 65° C (-40 to 149° F). We plan the mounting point and cable entry to match.
What does installing the Switch Flex cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







