Switch Aggregation
An 8-port, Layer 2 switch made for 10G SFP+ connections.
Switch Aggregation installation service
We install and configure the Switch Aggregation on site and hand it over documented. Installation across Germany by quote — we reply the same working day.
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
- Charged by time, minimum one hour; the amount, travel and material are in the quote.
Payment
- Transfer
- Invoice
- Pay after installation and handover
- SSL-encrypted connection
Installed across Germany
By appointment, on site
Reply the same working day
Email, phone or WhatsApp
Installation by quote
Written quote first
Documented handover
Settings and cabling on paper
Product overview
An 8-port, Layer 2 switch made for 10G SFP+ connections.
Who it is for
- Features
- (8) 10G SFP+ portsFanless, silent cooling
Technical specifications
- Weight
- Without mounting brackets: 2.6 kg (5.8 lb), With mounting brackets: 2.7 kg (6 lb)
- LLDP-MED
- Yes
- Dimensions
- 442 x 120 x 43.7 mm (17.4 x 4.7 x 1.7")
- Management
- Ethernet, AR
- STP & RSTP
- Yes
- Voice VLAN
- Yes
- Form Factor
- Rack mount (1U)
- LCM Display
- 1.3" touchscreen
Show all 50 specificationsShow fewer
- Flow Control
- Yes
- Jumbo Frames
- Yes
- Power Method
- Universal input, 100–240V AC, 50/60 Hz
- Power Supply
- AC/DC, internal, 36W
- IGMP Snooping
- Yes
- Storm Control
- Yes
- 802.1X Control
- Yes
- Certifications
- CE, FCC, IC, Anatel: 04456-21-08356
- ESD Protection
- Air: ± 16kV, contact: ± 12kV
- Mount Material
- SGCC steel
- NDAA Compliant
- Yes
- Port Isolation
- Yes
- Port Mirroring
- Yes
- Forwarding Rate
- 119 Mpps
- Loop Protection
- Yes
- Supported VLANs
- 1,000
- Heat Dissipation
- 102 BTU/hr
- Egress Rate Limit
- Yes
- Enclosure Material
- SGCC steel
- Packet Buffer Size
- 1.5 MB
- Power Input Method
- AC input
- Switching Capacity
- 160 Gbps
- Access Lists · MAC
- 128
- Access Lists · IPv4
- 128
- MAC Address Blocking
- Yes
- Supported Rack Depth
- 400~1200 mm (15.7-47.2")
- LACP Port Aggregation
- Yes
- MAC Address Table Size
- 16,000
- Max. Power Consumption
- 36W (Including SFP modules)
- Port Layout · 10G SFP+
- 8 (10G/1G)
- Supported Voltage Range
- 100–240V AC
- DHCP Snooping & Guarding
- Yes
- Virtual Network Override
- Yes
- Ambient Operating Humidity
- 10 to 90% noncondensing
- MAC-Based Port Restriction
- Yes
- Ambient Operating Temperature
- -5 to 40° C (23 to 104° F)
- Total Non-Blocking Throughput
- 80 Gbps
- IP-Based ACLs & Network Isolation
- Yes
- MAC-Based ACLs & Device Isolation
- Yes
- Multicast & Broadcast Rate Limiting
- Yes
- Application Requirements · UniFi Network
- Version 5.14.12 and later
- Advanced IGMP Configuration (Querier, Fast Leave, Router Port)
- Yes
Questions about the Switch Aggregation?
Ask before you order: compatibility, PoE budget, cabling or mounting. We reply the same working day.
Switch Aggregation installation: installation and configuration
We install and configure the Switch Aggregation on site and hand it over documented.
1Rack installation
Mounted, earthed and powered, with cable management so the rack stays serviceable.
2VLAN configuration
Office, guest, VoIP and camera traffic separated, trunks to the firewall and access points.
3Replacing an old switch
Old configuration read out and carried over, changeover planned to keep downtime short.
4Documentation
Port plan, VLAN list and configuration backup handed over.
What is included for this product
- VLANs for office, guests, phones and cameras
- Clean patching with labelled ports
- Firmware check and secured management access
- Configuration backup and port documentation
Price and process
Charged by time, minimum one hour; the amount, travel and material are in the quote.
Tell us briefly what should be installed and where. We reply the same working day and agree an appointment — installation across Germany.
Documents
Frequently asked questions
Can the Switch Aggregation be installed outdoors or in unheated areas?
The manufacturer specifies protection Air: ± 16kV, contact: ± 12kV and an operating temperature of -5 to 40° C (23 to 104° F). We plan the mounting point and cable entry to match.
What does installing the Switch Aggregation cost?
Charged by time, minimum one hour; the amount, travel and material are in the quote. For a firm figure, tell us the site and how many units.
Do you install outside Berlin?
Yes — installation across Germany, by appointment.
How quickly will I hear back?
The same working day. We do not offer a guaranteed response time; the appointment is scheduled by urgency.
Related products
More products we supply and install







