# Smart home set-up

> We set up smart-home devices and connect them reliably to your home network: cameras and doorbell, lights, thermostats and sensors, with a separate Wi-Fi for the devices and automations you can change yourself. Work on the 230-volt installation is done by your electrician.

URL: https://utechit.de/home/smart-home
Alternate language version: https://utechit.de/de/home/smart-home
Language: en
Provider: UltraTech Germany, Leipziger Straße 40, 10117 Berlin
Service area: Deutschland

A smart home rarely fails because of a device, but because of the network: cameras drop out, sensors go silent, and every app wants its own account. We first make sure the Wi-Fi can carry the devices, separate them from the network your laptops use, and set them up so you can run and change them without us. Cameras are aimed so they show only your own property.

## Typical jobs

- **Camera and doorbell** — Set up, aimed, on your phone.
- **Heating control** — Thermostats with schedules and away mode.
- **Devices drop out** — Fix the Wi-Fi first.
- **Everything in one app** — Devices brought together, automations set up.

## What we deliver

- Advice on which devices work together
- Set-up of cameras, video doorbell, lights, thermostats and sensors
- A separate Wi-Fi for smart-home devices
- Automations: lights, heating, notifications
- Cameras aimed to show only your property
- Walkthrough so you can change everything yourself

## WLAN, Zigbee or Thread: how smart-home devices connect

Which radio standard fits depends on the device: mains or battery, little data or a lot. This overview shows what each standard offers and what it needs.

| Radio standard | Strength | Needs | Fits when |
| --- | --- | --- | --- |
| WLAN | High data rates, already present in the home | Mains power at the device and good Wi-Fi where it sits | The device is mains-powered and sends a lot of data, such as a camera (general guidance) |
| Zigbee | Self-organising, self-healing mesh on 2.4 GHz and Sub-GHz, designed for low power use and long battery life (CSA) | A Zigbee hub as the counterpart | You have many small, battery-powered sensors and switches spread around the home |
| Thread (with Matter) | Open IPv6-based protocol on IEEE 802.15.4 for low-power end devices, with network-layer security (Thread Group) | For Matter devices, an internet-connected controller (hub or speaker) if you want control away from home | You want devices from different makers to work together in Apple Home, Google Home, Alexa, SmartThings or Home Assistant (CSA) |

We advise which standard fits your home and set the devices up on a separate network (BSI advice). We work with plug-in devices and the network; fixed 230 V connections are for your qualified electrician or a listed installer (§ 13 NAV).

## What you get at handover

- List of devices with accounts and apps
- Overview of the automations
- Walkthrough on site

## What does it cost?

Working time is charged, plus devices and travel – all in the quote first.

- **Set-up and automations:** Time and materials
- **Devices:** Itemised in the quote, or bought by you
- **Travel:** Stated first

What drives the price:

- Number of devices
- Existing Wi-Fi
- Number of automations

 Payment after installation and handover: SEPA bank transfer, invoice or PayPal.

## For an accurate quote

A list is enough.

- Existing devices and apps
- What should be added?
- What should happen automatically?
- How good is the Wi-Fi today?

## How a job runs

1. **Enquiry** — What should the smart home do, which devices do you already have?
2. **Proposal and quote** — Devices, network, working time.
3. **Set-up** — Wi-Fi first, then the devices, then the automations.
4. **Walkthrough** — You operate it, we watch.

## Frequently asked questions

### Do you also wire switches and lights?

No. Work on the 230-volt installation, such as in-wall actuators or fixed lights, is done by your electrician. We set the devices up and connect them afterwards.

### May my camera film the street?

Private cameras should show only your own property. Public paths and the neighbours do not belong in the picture. We aim the camera accordingly; the legal assessment stays with you.

### Why a separate Wi-Fi for the devices?

Smart-home devices often go without updates for a long time. On their own Wi-Fi they cannot reach your laptops and data, and one faulty device does not slow the whole network.

### Which brand do you recommend?

None in particular. What matters is that the devices work together and get updates. We set up what you have and advise on new purchases by features.

## Standards and sources

- [CJEU, judgment of 11 December 2014, C-212/13 (Ryneš): cameras covering public space fall outside the household exemption](https://curia.europa.eu/juris/liste.jsf?num=C-212/13)
- [BSI (in German): setting up a smart home securely – a separate network for IoT devices, no default passwords, check the update period before buying](https://www.bsi.bund.de/DE/Themen/Verbraucherinnen-und-Verbraucher/Informationen-und-Empfehlungen/Internet-der-Dinge-Smart-leben/Smart-Home/smart-home_node.html)

## Contact

Email: info@utechit.de
Phone: +49 30 50930365


---

## Provider

UltraTech Germany, Leipziger Straße 40, 10117 Berlin
Email: info@utechit.de · Phone: +49 30 50930365 (WhatsApp)
More: https://utechit.de/llms.txt · MCP: https://utechit.de/api/ucp/mcp
